W5100S Ethernet shield is designed using the WIZnet W5100S chip.
ioShield-L is an Ethernet BoosterPack for MSP430 LaunchPad development board(MSP-EXP430G2, TI).
WIZnet Ethernet HAT (Hardware Attached on Top) is a Raspberry Pi Pico pin-compatible board that utilizes W5100S and supports both 3.3V & 5V. Please refer to this link to find more information about W5100S. Raspberry Pi Pico Pin-Compatible Ethernet (W5100S Hardwired TCP/IP CHIP)
It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W Raspberry Pi Pico Mountable Ethernet W5100S, W5500, W6100 IO Module Mountable
ioShield-K is an Ethernet Shield for GR-KURUMI(Gadget Renesas KURUMI).
WIZwiki-W7500P is a SoC platform board based on the W7500P chip ( ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core, MAC & PHY. If you use WIZwiki-W7500P board, you can easily evaluate the W7500P and test its performance and all functions.
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
WizFi Shield utilizes fully certified WizFi210 wifi module to provide your Arduino with wireless capability. SPI interface is used to allow for faster transmission speed and to free up the Arduino’s UART. All the software and hardware materials are freely available and open source.
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Price increase due to material costs.
It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W Raspberry Pi Pico Mountable Ethernet W5100S, W5500, W6100 IO Module Mountable
By using WIZPoE-S1, which supports both Mode A and Mode B, you can efficiently power external applications within the 7W range without the need for a power cable, not only for Ethernet but also for various external applications
Surf 5 is a microcontroller evaluation board based on the W7500 that can be used with our PoE Modules.
Single Port RJ45 Connector with Intergrated Magnetics and LED for 10/100Base-T NIC Application
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Price increase due to material costs.
The IOP (Internet Offload Processor) W7500P is the one-chip solution which integrates an ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core & PHY for various embedded application platform especially requiring ‘Internet of things’.
NM7010B+ is the network module that includes W3150A+ (TCP/IP hardwired chip), Ethernet PHY (RTL8201CP) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W3150A+ and PHY chip. The NM7010B+ is an ideal option for users who want to develop their Internet enabling systems rapidly. EOL...
WIZ550SR is Serial to Ethernet module, It's mounted TCP/IP chip W5500 of WIZnet and Cortex-M3-based STM32F103RCT6 of STmicro. WIZ550SR does not contain RJ45 because very small size type. WIZ550SR provides the user Interface 2.00mm Pitch Pin header.
IPv4/IPv6,Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 8-sockets, Fast SPI/BUS
W5500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client, UDP and Modbus modes. The maximum baud rate of the serial port is 1.152Mbps. W5500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Substantial Price INCREASED for MCU.
W5100S Ethernet shield is designed using the WIZnet W5100S chip.
ioShield-L is an Ethernet BoosterPack for MSP430 LaunchPad development board(MSP-EXP430G2, TI).
WIZnet Ethernet HAT (Hardware Attached on Top) is a Raspberry Pi Pico pin-compatible board that utilizes W5100S and supports both 3.3V & 5V. Please refer to this link to find more information about W5100S. Raspberry Pi Pico Pin-Compatible Ethernet (W5100S Hardwired TCP/IP CHIP)
It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W Raspberry Pi Pico Mountable Ethernet W5100S, W5500, W6100 IO Module Mountable
ioShield-K is an Ethernet Shield for GR-KURUMI(Gadget Renesas KURUMI).
WIZwiki-W7500P is a SoC platform board based on the W7500P chip ( ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core, MAC & PHY. If you use WIZwiki-W7500P board, you can easily evaluate the W7500P and test its performance and all functions.
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
WizFi Shield utilizes fully certified WizFi210 wifi module to provide your Arduino with wireless capability. SPI interface is used to allow for faster transmission speed and to free up the Arduino’s UART. All the software and hardware materials are freely available and open source.